ASI 100% RTV Silicone "Clear"

$4.99

* Los gastos de envío se calculan en la pantalla de pagos

ASI 502 is a 100% RTV Silicone that is UL & NSF Recognized.  ASI 502 is a one-part, moisture-curing RTV (room temperature vulcanizing) silicone that cures to a strong, silicone rubber that maintains long-term durability and flexibility. Can be applied to vertical or overhead surfaces without flowing or sagging.

Highlights:

  • 100% Silicone
  • Chemical Resistant
  • Color Stable
  • High Temperature Resistance
  • Highly Flexible
  • Long Life
  • Low Temperature Resistance
  • Non Slump
  • One Component
  • RTV
  • UV Resistant

American Sealants, Inc.

Trust
Icon

Trust
Icon

Trust
Icon

Disponible Ahora!

Color: Clear
 
 Más opciones de pago

¡Agregue $150.00 más para obtener un envío GRATIS!

Recogida disponible en San Leandro, CA Warehouse
Normalmente está listo en 24 horas

TRUST ICON
SPECIFICATIONS
Area of Application
Bonding
Countertop
General Industrial
General Purpose
Glazing High Temperature
Waterproofing
Joint Seal
Tub and Tile
Sealing
Color
Clear
Material
Granite
Marble
Ceramics
Aluminum
Glass
Metals
Most Woods
Plastics
PVC
Steel
Porcelain
Size
10 oz
Type
Caulking Cartridge
Features
ASI 100% RTV Silicone (ASI 502) can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -70 to +400 degrees F.
Notes
ASI 502 (ASI 100% RTV Silicone) is permitted under regulations of the Food and Drug Administration where incidental food contact might be involved. FDA Regulation number is 175.105.
Painting
ASI 502 sealant should not be applied to surfaces that will be painted. Painting over sealant is not recommended because the paint film does not stretch with the extension of the sealant.

Priming
Priming for ASI 502 is not normally required for applications to nonporous surfaces.

Unprimed adhesion can be easily tested by applying a small trial bead and allowing 7 days for maximum adhesion to occur. If primer is required, contact ASI.

Surface Preparation
All surfaces should be clean and dry. It is recommended that bonding surfaces be solvent wiped with naphthas, ketones or chlorinated solvents. Specific solvents would include xylol, toluol and mineral spirits.

In case of plastics, determine suitability of solvent prior to use. Allow surface to dry thoroughly before applying sealant. Do not solvent wipe with alcohols or oil-containing solvents such as Varsol.